Contents
- 1 What is a rolling take off?
- 2 What is take off clearance?
- 3 What do pilots say when taking off?
- 4 Why do pilots say rotate when taking off?
- 5 Why do planes stop before taking off?
- 6 What does rolling mean in aviation?
- 7 What do pilots say before landing?
- 8 What happens if a plane takes off without clearance?
- 9 What does the symbol T with a black triangle?
- 10 What does Niner Niner mean?
- 11 Do pilots sleep with flight attendants?
- 12 Do fighter pilots wear diapers?
- 13 How fast is a 747 going when it lands?
- 14 What is the slowest speed an airplane can fly?
- 15 Why do pilots say heavy?
What is a rolling take off?
In fixed-wing aircraft, a rolling takeoff is one in which the aircraft does not stop on the runway when it enters from the taxi track but continues the takeoff by opening the throttle either during the turn on the runway or immediately after rolling out.
What is take off clearance?
The purpose of issuing clearances for an immediate takeoff is usually to improve runway occupancy. instructing the aircraft to clear the runway; de-conflicting the takeoff from a go around in the air; issuing of ‘stop takeoff ‘ instruction to the departing aircraft that has commenced the take – off roll.
What do pilots say when taking off?
Deadhead. While they may indeed be Grateful Dead fans, ‘deadhead crew’ is the common phrase used by pilots when referring to off -duty pilots and/or crew who are on board the plane as passengers.
Why do pilots say rotate when taking off?
Pilots say rotate because it is a verbal queue that an airplane has reached its predetermined rotation speed (frequently abbreviated to Vr). This is the speed at which control inputs can be applied to lift the nose off the runway and make the airplane fly away.
Why do planes stop before taking off?
There can be many reasons for deciding to perform a rejected takeoff, but they are usually due to suspected or actual technical failures, such as an engine failure, fire, incorrect configuration, aircraft controllability or environmental conditions such as windshear.
What does rolling mean in aviation?
Imagine three lines running through an airplane and intersecting at right angles at the airplane’s center of gravity. Rotation around the front-to-back axis is called roll. Rotation around the side-to-side axis is called pitch. Rotation around the vertical axis is called yaw.
What do pilots say before landing?
Thank you.” To indicate the landing clearance or final approach, the Captain will either make the following announcement and/or blink the No Smoking sign. “Flight attendants, prepare for landing please.” “Cabin crew, please take your seats for landing.”
What happens if a plane takes off without clearance?
Consequences. Taking off without ATC clearance may lead to: Runway Incursion – The aircraft may have been cleared only to the runway holding point. Rejected Take Off – The tower controller would likely observe the aircraft starting the take – off roll and may instruct the crew to cancel it.
What does the symbol T with a black triangle?
What does the symbol T within a black triangle in the minimums section of the IAP for a particular airport indicate? A) Instrument takeoffs are not authorized. Takeoff minimums are 1 mile for aircraft having two engines or less and 1/2 mile for those with more than two engines.
What does Niner Niner mean?
Aviators often speak “pilot English” to avoid miscommunications over radio transmission. “Tree” for instance, means three, “fife” is the number five and “ niner ” means nine, says Tom Zecha, a manager at AOPA.
Do pilots sleep with flight attendants?
Next: It’s not uncommon for the pilots to sleep with the flight attendants (even if they’re married).
Do fighter pilots wear diapers?
Male fighter pilots use something called a “piddle pack”, which is a bag filled with absorbent gel. When the need strikes, they unzip and pee.
How fast is a 747 going when it lands?
What speed does a Boeing 747 land at? A 747 ‘Jumbo Jet’ would typically land at a speed of about 145kts-150kts (166mph-172mph), depending on the landing flap setting selected.
What is the slowest speed an airplane can fly?
Aeroplanes, or airplanes if you’re American, need to maintain a certain speed to allow flight. Technically this is the so-called ‘stall speed ‘, where air passes over the wings fast enough to sustain altitude, and for small planes this can be less than 50km/h (31mph).
Why do pilots say heavy?
When a pilot uses the phrase “ heavy,” he is reminding ATC that his aircraft is large and requires more separation between it and the aircraft following.