# Question: What Does Vs Stand For In Aviation?

## What does VS mean in aviation?

VS means the stalling speed or the minimum steady flight speed at which the airplane is controllable. VS0 means the stalling speed or the minimum steady flight speed in the landing configuration. VS1 means the stalling speed or the minimum steady flight speed obtained in a specific configuration.

## What are the V speeds for airplanes?

Regulatory V-speeds

V – speed designator Description
V FE Maximum flap extended speed.
V FTO Final takeoff speed.
V H Maximum speed in level flight at maximum continuous power.
V LE Maximum landing gear extended speed. This is the maximum speed at which a retractable gear aircraft should be flown with the landing gear extended.

39

## What is V ref?

VREF is a speed: That gives you at least a 23 percent margin over V SR0, reference stall speed in the landing configuration. That is at least as high a V MCL, minimum maneuver speed in the landing configuration.

## What is W V in aviation?

Search for glossary terms (regular expression allowed) Term. Main definition. W / V. Wind Direction and Speed.

You might be interested:  Question: How Much Aviation Biofuel Is Being Produced?

## What is V2 in aviation?

V2: Takeoff Safety Speed. V2 is the minimum speed that needs to be maintained up to acceleration altitude, in the event of an engine failure after V1. Flight at V2 ensures that the minimum required climb gradient is achieved, and that the aircraft is controllable.

## What does VS stand for?

vs is often an abbreviation for versus.

## Why are they called V speeds?

The “ V ” is from the French word ‘Vitesse’ which means ‘ speed ‘ or ‘rate’. Important aviation Airspeeds are identified and defined using standard terms. Scientists and Engineers refer to Airspeeds as ‘ V ‘ Speeds. Commonly, people think in terms of “ Velocity ”, and it is a nice memory aid, as “ Velocity ” begins with “ V ”.

## What is V1 and V2 on takeoff?

A: V1 is the speed by which time the decision to continue flight if an engine fails has been made. It can be said that V1 is the “commit to fly” speed. V2 is the speed at which the airplane will climb in the event of an engine failure. It is known as the takeoff safety speed.

## What is the takeoff speed of a 737?

Aircraft Takeoff Weight Takeoff Speed
Boeing 737 100,000 lb 45,360 kg 150 mph 250 km/h 130 kts
Boeing 757 240,000 lb 108,860 kg 160 mph 260 km/h 140 kts
Airbus A320 155,000 lb 70,305 kg 170 mph 275 km/h 150 kts
Airbus A340 571,000 lb 259,000 kg 180 mph 290 km/h 155 kts
You might be interested:  Often asked: What Is The Average Gpa Of Us Army Cadets Who Branch Aviation?

## What speed does a Cessna land at?

Performance

Maximum Cruise Speed 124 ktas (230 km/h)
Landing Distance 1,335 ft (407 m)
Ground Roll 575 ft (175 m)
Service Ceiling 14,000 ft (4,267 m)
Maximum Climb Rate 730 fpm (223 mpm)

## What is MMO speed?

VMO/ MMO. — Maximum operating limit speed for turboprops or jets. MMO is the effective speed limit (“barber pole” on the airspeed indicator) at higher altitudes. MMO is usually much higher for swept-wing jets than for straight-wing designs.

## What is VREF landing speed?

The regulations define Vref as “the speed of the airplane, in a specified landing configuration, at the point where it descends through the 50-foot height in the determination of the landing distance.” You may have heard pilots refer to this point in the landing approach as when the airplane is “crossing the fence” or

## What does CTC mean in aviation?

CTC – Chief Training Captain.

## What does AAA stand for in aviation?

Accounting and Authorisation of Hold Baggage for Carriage by Air ( AAA ) background and origins: ● definition of AAA (requirement to reconcile hold baggage with passenger flying, airline responsibility, automated systems since 1998.

## What does BTH mean in aviation?

BTH probably means: Begin. Total-engine-overhaul-shop.